Technical Documents

TPS (Titanium Plasma Spray) Coating is a porous coating made using vacuum plasma spary process that can be applied on: Ti6AL4V, Ti6AL4V Eli, CoCr and TiC substrate materials. Typical coating thickness is from 0.010 – 0.030 inches

Download

TPS Asymmatrix Comparison Titanium plasma spray (TPS) and sintered coatings have been two of the predominant fixation technologies for orthopedic devices for the last two decades. Porous coated materials can provide early mechanical stabilization preventing early micromotion due to their increased surface. Their capacity for osseointegration also offers the advantage of... Download

HA Technical Information Sheet

HA (Hydroxyapatite) Coating is a thin dense coating made using atmospheric plasma spary process that can be applied on: Ti6AL4V, Ti6AL4V Eli, CoCr and SS substrate materials. Typical coating thickness is from 25 – 75 μm.

Download

Asymmatrix Technical Information Sheet

Titanium ASYMMATRIX® is available for porous coating: Commercially pure irregular shaped titanium powder conforming to ASTM F 67 and ASTM 1580 is utilized to coat Ti6Al4V components. Three coating layers are applied.Traditional vacuum sintering conditions similar to spherical bead coatings are utilized in Titanium ASYMMATRIX®.

Download